The system contains 4.0 mm or 6.0 mm scope with 4-way Articulation combining 2 cameras in parallel. 

You can decide between 0° DOV (direction of view) or one 90° or both together. 

With diameters of 4.0 mm or 6.0 mm and lengths from 1.5 m to 7.5 m the iRIS X PRO DUAL VIEW System leaves nothing to be desired.

Choose 4 mm or 6 mm diameter with integral display as the iRis DUAL VIEW self-contained multifunctional display or two XLED DUAL VIEW videoscopes interchangeable with the X-Capture video hub.

Do you have multiple applications? Set yourself up with the most progressive videoscope on the market. The 4 mm and 6 mm diameter videoscopes are interchangeable for use on the X-Capture hub.

Small and large turbines? The 4 mm DUAL VIEW videoscope is ideal for corporate aviation. It meets all the requirements for the Pratt & Whitney Canada engine models with proven optics. The 6 mm is ideal for your larger engine models: CFM56, CF6, PW2000, PW4000 and similar motors. Small and larger compressor, turbines and combustion chambers are more quickly inspected with less down time, saving you money. 

You accomplishing twice as much with a DUAL VIEW videoscope. The world’s first dual channel videoscopes, two image sensors in one. Save time by looking ahead and instantaneously switch to side view at the touch of a button or looking in both directions simultaneously via split screen.

Take advantage of new technology – it’s not only a new and unique product, but a new and fast way to accomplish your inspections. Direct and side view inspections with a single videoscope and no tip adapters required!

With diameters of 4.0 mm or 6.0 mm and lengths from 1.5 m to 7.5 m the iRis X PRO DUAL VIEW system leaves nothing to be desired.

• Weld inspection of pharmaceutical and food processing pipe: direct view to locate the target then, with a simple touch of the menu function, switch to side view to look directly on the weld for detailed view of the color, tail and pitting
  
• Aviation and stationary turbines: ideal for inspection of turbines and compressors, inspect the rotor path and quickly switch to side view for a view between the vanes to secondary stages of blades 
  
• Casting: easily inspect for blockages directly ahead and switch to view cross over and through holes